|
<BACK |
|
C-HAWKE VME
NTDS/ANEW Interface Board |
|
|
|
|
SYSTEM ARCHITECTURE FEATURES:
|
|
VME Revision C.1 (IEEE P1014) compatible |
|
|
Single 6U height Eurocard |
|
|
MC68020 32-bit CPU Single 6U height Eurocard |
|
|
VIC068 VMEbus controller |
|
|
Operates as A32/D32, A24/D16 and A16/D8 in master or slave mode |
|
|
High speed 32-bit VME transfer in A32/A24/D32 mode |
|
|
Full slot 1 master functionaly |
|
|
System level controller function including four level arbitration |
|
|
7-level interrupt handler |
|
|
8K byte to 1M byte of system EPROM |
|
|
Tri-ported 512K byte Video RAM for NTDS I/O, on-board CPU and
VMEbus |
|
|
8K byte to 1M byte user EPROM socket |
|
|
RS-232 port for monitor/debug applications |
|
|
Battery-backed SRAM for on-line system and configuration storage |
|
|
Real Time Clock for user specific applications and system diagnostics |
|
|
Software programmable VMEbus interface parameters |
|
|
Built-In-Test (BIT) features for self diagnostics |
|
|
Front Panel switches and LEDS to aid in operation and diagnostics |
|
|
Front panel hex display indicates board address/system status |
|
|
| NTDS INTERFACE FEATURES |
|
|
MIL-STD-1397 A/B compatible |
|
|
Full duplex 8/16/24/32 bit transfer |
|
|
Parallel access to NTDS data and status words |
|
|
Dual 256K byte Video RAM configured as 32-bit RAM and FIFO, with dynamic sizing of NTDS I/O buffer |
|
|
Eight S/W selectable speed options ranging from 1.2 to 16.2 microseconds to optimize NTDS data transfers |
|
|
Passive data collection, analysis and time tagging capability |
|
|
Independent word count registers and time-out counters for NTDS input and output |
|
|
Standard 34 and 50 pin I/O connectors |
|
|
Software selectable control lines
(EIE, EFR, ODR) |
|
|
Receive and transmit multiple forced Efs |
|
|
Software selectable NTDS I/O Modes (Computer, Intercomputer, Peripheral) |
|
|
Supports multiple VME NTDS boards in a single VME enclosure |
|
|
|
SOFTWARE FEATURES |
|
|
Unix I/O driver |
|
|
Low level drivers compatible with
Ada, C, Pascal and other high level languages |
|
|
User EPROM for application
firmware |
|
|
Monitor program with
Assembler/Disassembler via RS-232C |
|
|
|
DESCRIPTION |
|
The HAWKE VME NTDS interface Board from Sabtech is an off-the shelf, NDI solution that provides a high speed intelligent 32-bit interface between the VMEbus and MIL-STD 1397 A/B input/output devices. This capability allows direct connection of military computer equipment to the open architecture VMEbus for application such as software development, simulation and training support. |
